Browsing ⇒ IOOS: The U.S. Integrated Ocean Observing System by Title
Now showing items 1-20 of 36
-
8th EGO Meeting & International Glider Workshop Meeting Summary.
(U.S. Integrated Ocean Observing System, Siver Spring, MD, 2019)The goal of the 8th EGO Meeting and International Glider Workshop, held May 21-23, 2019, was to strengthen international collaboration through community dialogue, exchanges of information, sharing of experiences, and ... -
Central and Northern California Ocean Observing System (CeNCOOS) Standard Operating Procedures for Instruments and Sensors (High Frequency Radar, Gliders, and in situ observing systems). Revised: January 30, 2017.
(Central and Northern California Ocean Observing System (CeNCOOS), Moss Landing, CA, 2017)This document describes the instruments and sensors that CeNCOOS-supported investigators operate. These instruments are supported financially by CeNCOOS or operated in close partnership where CeNCOOS has influence o ... -
CTD Data Quality Control at STS/ODF [Presentation at QARTOD III, November 2–4, 2005]
(Scripps Institution of Oceanography (SIO), Shipboard Technical Support (STS), Oceanographic Data Facility (ODF), La Jolla, CA, USA, 2005)The Scripps Institute of Oceanography / Shipboard Technical Support / Oceanographic Data Facility collects and quality controls shipboard Conductivity / Temperature / Depth profiles. The SIO/STS/ODF is introduced and the ... -
Data Interoperability Between Elements of the Global Ocean Observing System.
(2019)The data management landscape associated with the Global Ocean Observing System is distributed, complex, and only loosely coordinated. Yet interoperability across this distributed landscape is essential to enable data ... -
Deployment and Maintenance of a High-frequency Radar (HFR) for Ocean Surface Current Mapping: Best Practices.
(University of California San Diego, Scripps Institution of Oceanography for SCCOOS, La Jolla, CA, 2008)The use of HF radar for the collection of ocean surface current information in near-real time is quickly expanding. As this national radar network grows and matures, there will be a need for a defined set of best practices ... -
From the Oceans to the Cloud: Opportunities and Challenges for Data, Models, Computation and Workflows.
(2019)Advances in ocean observations and models mean increasing flows of data. Integrating observations between disciplines over spatial scales from regional to global presents challenges. Running ocean models and managing the ... -
Manual for Real-Time Quality Control of In-situ Temperature and Salinity Data: Version 2.1.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System,, Silver Spring, MD., 2020)This manual documents a series of test procedures for data quality control of in-situ temperature and salinity sensors. In-situ temperature and salinity observations covered by these procedures are collected in oceans, ... -
Manual for Real-Time Quality Control of In-Situ Surface Wave Data: A Guide to Quality Control and Quality Assurance of In-Situ Surface Wave Observations Version 2.1.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System,, Silver Spring, MD., 2019)This manual documents a series of test procedures for data QC of in-situ surface wave sensors. In-situ wave observations covered by these procedures are collected in real time as a measure of wave characteristics (wave ... -
Manual for Real-Time Quality Control of In-situ Temperature and Salinity Data: a Guide to Quality Control and Quality Assurance for In- situ Temperature and Salinity Observations. Version 1.0. [SUPERSEDED by DOI: http://dx.doi.org/10.25607/OBP-875]
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2014)The U.S. Integrated Ocean Observing System (IOOS) has a vested interest in collecting high quality data for the 26 core variables (U.S. IOOS 2010) measured on a national scale. In response to this interest, U.S. IOOS ... -
Manual for Real-Time Quality Control of Phytoplankton Data: A Guide to Quality Control and Quality Assurance for Phytoplankton Observations. Version 1.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2017)The purpose of this manual is to provide guidance to the U.S. IOOS and the ocean-observing community at large for the real-time QC of phytoplankton measurements using an agreed-upon, documented, and implemented standard ... -
Manual for Real-Time Quality Control of Water Level Data: A Guide to Quality Control and Quality Assurance for Water Level Observations. Version 2.1
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2021)The purpose of this manual is to provide guidance to the U.S. IOOS and the WL community at large for the real-time QC of WL measurements using an agreed-upon, documented, and implemented standard process. This manual is ... -
Manual for Quality Control of Temperature and Salinity Data Observations from Gliders. Version 1.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, U.S. Integrated Ocean Observing System, Glider Data Assembly Center, Silver Spring, MD, 2016)This manual describes the tests required to ensure the quality control (QC) of real-time data collected by sensors attached to profiling gliders. Profiling gliders are self-propelled (buoyancy driven), autonomous underwater ... -
Manual for Real-Time Quality Control of Water Level Data: a Guide to Quality Control and Quality Assurance for Water Level Observations. Version 2.0. [SUPERSEDED BY DOI:http://dx.doi.org/10.25607/OBP-1043]
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2016)The purpose of this manual is to provide guidance to the U.S. IOOS and the WL community at large for the real-time QC of WL measurements using an agreed-upon, documented, and implemented standard process. This manual is ... -
Manual for Real-Time Quality Control of Dissolved Nutrients Observations: a Guide to Quality Control and Quality Assurance for Dissolved Nutrients Observations in Coastal Oceans Version 1.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2015)The purpose of this manual is to provide guidance to the U.S. IOOS and the dissolved nutrients (DN) community at large for the real-time QC of DN measurements using an agreed-upon, documented, and implemented standard ... -
Manual for Real-Time Quality Control of Dissolved Oxygen Observations: a Guide to Quality Control and Quality Assurance for Dissolved Oxygen Observations in Coastal Oceans. Version 2.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2015)Each manual describes the individual QC tests to be applied to the data stream prior to data dissemination. For DO data, the manual describes eleven tests that are divided into three groups that are either required (group ... -
Manual for Real-Time Quality Control of High Frequency Radar Surface Current Data: a Guide to Quality Control and Quality Assurance for High Frequency Radar Surface Current Observations. Version 2.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2022)The U.S. Integrated Ocean Observing System® (IOOS®) has a vested interest in collecting high quality data for the 34 core variables (https://ioos.noaa.gov/about/ioos-by-the-numbers) measured on a national scale. In response ... -
Manual for Real-Time Quality Control of In-Situ Current Observations: a Guide to Quality Control and Quality Assurance of Acoustic Doppler Current Profiler Observations. Version 2.0. [SUPERSEDED by http://dx.doi.org/10.25607/OBP-536]
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2015)The purpose of this manual is to provide guidance to the U.S. IOOS and the in-situ currents community at large for the real-time QC of in-situ current measurements using an agreed-upon, documented, and implemented standard ... -
Manual for Real-Time Quality Control of In-Situ Current Observations: a Guide to Quality Control and Quality Assurance of Acoustic Doppler Current Profiler Observations. Version 2.1.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System,, Silver Spring, MD., 2019)The purpose of this manual is to provide guidance to the U.S. IOOS and the in-situ currents community at large for the real-time QC of in-situ current measurements using an agreed-upon, documented, and implemented standard ... -
Manual for Real-Time Quality Control of In-Situ Surface Wave Data: a Guide to Quality Control and Quality Assurance of In-Situ Surface Wave Observations Version 2.0. [SUPERSEDED BY http://dx.doi.org/10.25607/OBP-759]
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2015)This manual documents a series of test procedures for data QC of in-situ surface wave sensors. In-situ wave observations covered by these procedures are collected in real time as a measure of wave characteristics (wave ... -
Manual for Real-Time Quality Control of Ocean Optics Data: a guide to quality control and quality assurance for coastal and oceanic optics observations. Version 1.0.
(U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Integrated Ocean Observing System, Silver Spring, MD, 2015)The purpose of this manual is to provide guidance to the U.S. IOOS and the optics community at large for the real-time QC of optics measurements using an agreed-upon, documented, and implemented standard process. This ...